How Safety Glasses Are Needed To Be Fit To Ensure Absolute Safety?

 

Safety and protection is the utmost concern when you are at work field and safeguard of your eyes is of greatest priority in this matter. Hence, Safety Glasses and Goggles Came Into Existence To Save Your Eyes from any unexpected accidents that may occur at your workplace. But The Selection Of Proper Safety Glasses And Goggles Is Very Important to provide full safety to your eyes. Just choosing a pair of safety glasses for your use may lead to many troubles and severe consequences. Instead of providing safety and protection, unfit glasses will increase the risk rather than decreasing it. Although it was believed earlier that one particular size will be enough for the entire population. But later it was revealed that due to the difference in sizes of head and face, it is not possible that one single size will fit everyone. Hence properly fitted eye wear is very important to choose so that Total Safety Of The Eyes Is Ensured. Properly fitted eye wears not only look stylish but also gives comfort to the worker while at work. There is no necessity to waste time in removing and wearing the glasses again and again. This saves the eyes from injuries, dusts and chemicals in a far better manner.

There are certain tips needed to be followed while choosing a proper eye wear that will ensure your 100% protection.

·        No Painful Or Intolerable Weak Points: You must select the safety glasses which are comfortable for you and see to it that no pressure points on the back of the ears or on the side of the head is hurt.

·        Notice The Comfort Of The Nose Piece: The nose piece is very important. You must take care of its ease and comfort. Any small pinch or pain must not occur due to the nose piece.

·        You Must Be Able To Visualise Every Side: Take care of the visuals. They must be clear and no hindrance must be there to look at all directions.

·        Notice The Weight Of The Glasses: You Must be comfortable with the weight of the safety eye wear. The frames must properly fit on your face and you must not feel over burdened by its weight. The heaviness must be divided evenly between the face and nose.

·        The Space Between The Eyes And Frames Must Be Comfortable: A certain amount of gap is important between your eyes and the frame. Frames must not touch the eyelashes but remain near to the eyes. Say 6-8mm gap is preferable in most cases.

·        Eyebrow Must Be Shielded: Eyebrows and the delicate tissues near them must come inside the lenses for full security.

·        Stability: You must check whether the eye wear stays in its place and not shake or loosen its grip as you move your head. The eye wear must fit your eyes very smoothly and remain stable for the entire day at work.

Thus we can understand that Fitness Of The Safety Glasses And Goggles Is Very Important to keep the safety of the eyes intact. Always try the above mentioned points while you are Choosing A Safety Eye Wear. If you find that you are not comfortable with one type of the eye wear, you should reject it and try for the other one. This will save you from many dangerous situations which may infect your eyes for the lifetime.

Comments

Popular posts from this blog

How to Choose the Best Safety Glasses and Goggles

The Reasons For Wearing Safety Glasses And Goggles

What Are Safety Glasses And Goggles?